Electrical Wiring Tips For A Home Workshop

Posted on: 9 May 2018

Are you designing a home workshop? If you are, then you should know that the electrical design and wiring is an important part of the process because of the electrical tools and equipment you will be using. Keep these tips in mind to ensure your workshop wiring goes according to plan.

Confirm that the Panel Can Handle the Load

The main electrical panel has a maximum capacity that determines the power your whole house, including the workshop, can draw from it. It's likely that the existing panel will be able to handle the additional load in the workshop. However, you shouldn't leave anything to chance, get positive confirmation. You may have to upgrade the panel if it cannot handle the increased load.

Let the High-Powered Tools Have Dedicated Outlets

Overloading a circuit is one of the most dangerous electrical mistakes you can make in a workshop. Placing tools that draw a lot of power on the same circuit as other electrical appliances or tools increases the risk of an overload. To reduce the chances of this happening, ensure that the high-powered tools have their own dedicated circuits. This is why you need a professional electrician to design your electrical layout; the electrician will ensure a safe circuit design.

Consider Having a Subpanel in the Workshop

Whether your main electrical panel as spaces for additional circuits or not, you should consider installing a subpanel in the workshop. Here are the main advantages of such a move:

  • You get to run one big conduit from the main panel to the workshop instead of multiple cables
  • It allows you to turn off power to the whole workshop when you are not using it
  • It ensures that the workshop doesn't share any circuit with the main house, which is a safe move

Keep Lighting on a Separate Circuit

It is also a good idea to place the lighting fixtures for the workshop on a dedicated circuit. This is a huge safety measure that increases the chance that the lights will always be on even if there is an electrical malfunction in the basement. For example, when a power tool malfunctions and trips the breaker, you don't want to be left in the dark with dangerous tool all around you. Placing the lights on a dedicated circuit ensures you never get to face such danger.

The above tips will help you secure an efficient and safe electrical design for your workshop. Don't forget to involve a professional electrical service like Powell's Electric Service, Inc. in the process right from the design stage.

Share